Bike Parks: trails, traffic and safety in view

Riders per trail, waiting time at the lift, trail surface after rain and the bins at the hut in one platform. baiond shows the operator where the park is filling up before it gets dangerous.

Request a consultation Get the industries folder

Measured here

Bike Parks: trails, traffic and safety in view — Trail 3 · Flow line, lower section · 08:32

Rider flow 28/min

Safety limit 20/min

On track 41

The challenge

What goes wrong quietly.

Trails you cannot see

The park stretches over a mountainside. How many riders are on trail 3 right now, and whether the flow line is jammed at the lower jump, is a question answered by radio or not at all.

Incidents that reach you late

A slick section after rain, a broken berm, a rider down: the patrol finds it on the next round. Until then every rider on the trail is on their own.

Maintenance by rota, bins by luck

The crew rebuilds the trail that is on the plan, not the one that took the most wheels. The bins at the hut overflow on the sunny Sunday, not on the day they were scheduled to be emptied.

Ask baiond

Questions you would ask on site.

Three situations from this industry, answered the way baiond answers: the readings, the reasons, a recommendation and the source. Tap one or type your own.

baiond AI Your data. Real answers.

Demo · not connected to live sensorsDemo

Is trail 3 operating within safe capacity limits?

You 08:32

Checked Trail counters · Surface sensors · baiond Gateway How did baiond know?

Sensor
baiond Gateway
Space System
AI agent

The sensor reports to the baiond Gateway, the Space System puts the reading in context (location, threshold, history), and the AI agent turns it into an answer.

Source: Trail counters · Surface sensors · baiond Gateway

Rider flow 28/min
Safety limit 20/min
On track 41

No. Rider flow on trail 3 has increased to 28 bikes per minute, exceeding the recommended safety limit of 20 bikes per minute, with 41 riders on track. Combined with recent rainfall, trail surface grip has decreased, increasing the risk of accidents and trail damage.

baiond AI 08:32

Recommendation

Temporarily redirect riders to trail 2 and notify the trail crew to inspect the affected section.

Would you like me to investigate further?

How long are riders waiting at the lift right now?

You 11:05

Checked Queue counters · Lift data · Space System How did baiond know?

Sensor
baiond Gateway
Space System
AI agent

The sensor reports to the baiond Gateway, the Space System puts the reading in context (location, threshold, history), and the AI agent turns it into an answer.

Source: Queue counters · Lift data · Space System

Waiting time 23min
Target ≤ 10min
In queue 186

Too long. Waiting time at the valley station is 23 minutes, against a target of 10 minutes or less, with 186 riders in the queue. The queue has grown steadily since 10:20.

baiond AI 11:05

Recommendation

Bring the two carriers back into service and restart the gate B scanner. Announce the current waiting time on the screen at the hut so riders spread out over the next hour.

Would you like me to investigate further?

Do the bins at the hut need emptying before the afternoon?

You 12:40

Checked Ultrasonic fill-level sensors · baiond Gateway How did baiond know?

Sensor
baiond Gateway
Space System
AI agent

The sensor reports to the baiond Gateway, the Space System puts the reading in context (location, threshold, history), and the AI agent turns it into an answer.

Source: Ultrasonic fill-level sensors · baiond Gateway

Fill level 84%
Empty at 80%
Full in approx. 1.5h

Yes, two of them. The terrace bins at the hut are at 84 %, above the emptying threshold of 80 %, and at the current rate they will be full in about 1.5 hours. The bins at the trailheads are below 40 %.

baiond AI 12:40

Recommendation

Send the hut team to empty the two terrace bins now and move the 16:00 round to 17:30. Add a third bin on the terrace for the season.

Would you like me to investigate further?

Answers are generated by AI, may contain mistakes and use example values. Please don’t enter personal data. Privacy

Sensors in use

Where the sensors sit.

Every dot is a sensor family in its typical place. Select one to see what it measures and what baiond does with it.

baiond connects the counters at the trailheads and the lift, the surface and weather sensors along the trails and the fill-level sensors in the bins on one platform. Every trail reports riders per minute, moisture and grip continuously; you set the limit per trail, and when it is exceeded the crew on duty gets a message with the trail, the readings and the section to check. Ask on a busy Saturday where it is tight, and the answer names the trail.

From the reading to your phone

What changes

The same site, run differently.

Riders on trail 3 are a guess from the lift queue.

12 on track, 67 today, per trail, on the screen at the hut.

A slick section is found on the next patrol round.

Trail moisture above the limit after rain flags the section before the first rider.

The crew rebuilds the trail that is on the rota.

The crew rebuilds the trail that took 4,000 wheels this week.

Bins overflow on the sunny Sunday.

The bin reports 80 % full; it is emptied before the lunch rush.

In use at and in partnership with

Download · PDF · one per industry

Your industry guide

One PDF for your industry: the questions baiond answers there, the sensors that measure it and what changes on site.

Your industry Name Email Phone (optional)

We send the download by email and may contact you about baiond. No newsletter. Privacy policy

Questions

What managers ask before they start.

How does baiond count riders on a trail?

Counters at the trailhead and at the end of each trail record every bike that passes, anonymously. baiond turns the two counts into riders on track, riders per minute and the daily total per trail.

Can it tell me when a trail is over capacity?

Yes. You set a limit per trail in riders per minute or riders on track. When it is exceeded, the crew gets a message and can redirect riders at the lift, put up a sign or close the trail; every closure is logged with time and reason.

What happens after heavy rain?

Surface sensors on the exposed sections report moisture and temperature. Combined with the rain gauge and the forecast, baiond flags sections that are likely to be slick and suggests which trails to open first once they drain.

Do the sensors need power or cables on the mountain?

No. Counters, surface sensors and bin sensors run on batteries or small solar cells and send by LoRaWAN over long distances to the baiond Gateway at the valley station or the hut.

Can I use the numbers for the season report and the lift company?

Yes. Riders per trail, per day and per season, peak hours and closures are exported in a click. Operators use them for trail investment decisions, the lift contract and the tourism board.

Does baiond also work for pump tracks and city bike lanes?

Yes. The same counters and platform serve a municipal pump track, a bike lane or a trail centre without a lift; only the limits and the messages change.